Product ID:RESIN BONDED ABRASIVE PRODUCTS
MSDS Date:01/10/1996
FSC:6850
NIIN:00F053475
MSDS Number: CDRMM

NORTON COMPANY

1 NEW BOND ST
WORCESTER, MA 01615-0008
US

Emergency Phone: 508-795-5000

Info Phone: 508-795-5000

Cage: FO413

NORTON COMPANY

15008 WORCESTER, MA 01615-0008 US

Telephone: 508-795-5000

Cage: FO413

ZIRCONIUM OXIDE, ZIRCONIUM DIOXIDE *96-4*

CAS: 1314-23-4

RTECS: ZH8800000

ACGIH TLV: 5 MG/CUM

ALUMINUM OXIDE, BAUXITE, ALUMINA, DIALUMINUM TRIOXIDE

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

PHENOLIC RESIN, PHENOL FORMALDEHYDE RESIN, PHENOL POLYMER W

CAS: 9003-35-4

GLASS OXIDE, FIBER GLASS WOOL, LEAD BOROSILICATE GLASS

CAS: 65997-17-3

RTECS: LK3651000

SILICON CARBIDE

CAS: 409-21-2

RTECS: VW0450000

ACGIH TLV: 10 MG/CUM

CALCIUM OXIDE; LIME

CAS: 1305-78-8

RTECS: EW3100000

OSHA PEL 5 MG/CUM

ACGIH TLV: 2 MG/CUM

CRYSTALLINE-QUARTZ SILICA, SILICA DUST (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL 10 MG/CUM %RESP SIO2

ACGIH TLV: 0.1 MG/CUM RESP DUST

BARIUM SULFATE, BARYTES *96-4*

CAS: 7727-43-7

RTECS: CR0600000

OSHA PEL 10 MG/CUM

ACGIH TLV: 10 MG/CUM

FLUORIDE

SULFATES AND SULFIDES

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:DUST MAY BE SLIGHTLY IRRITATING TO
EYES & RESPIRATORY TRACT. MAY IRRITATE SKIN.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED,
GIVE CPR. SKIN: WASH W/SOAP & WATER. EYES: WASH W/LARGE AMOUNTS OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Spill Release Procedures:NORMAL CLEAN UP PROCEDURES.

Handling and Storage Precautions:ALWAYS HANDLE W/CARE. ALWAYS INSPECT
ALL WHEELS BEFORE MOUNTING. ALWAYS CHECK MACHINE SPEED AGAINST THE
MAXIMUM SAFE OPERATING SPEED MARKED ON WHEEL.
Other Precautions:ALWAYS CHECK MOUNTING FLANGES FOR EQUAL & CORNER
DIAMETER. ALWAYS USE MOUNTING BLOTTERS. ALWAYS BE SURE WORK REST IS
PROPERLY ADJUSTED. ALWAYS USE A SAFETY GUARD COVERING AT LEAST
ONE-HALF OF THE GRIN DING WHEEL. (SUPP)

Respiratory Protection:RESPIRATORS ARE REQUIRED WHEN AIRBORNE
CONTAMINANT LEVELS EXCEED TO TLV.
Ventilation:ADEQUATE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:HEARING PROTECTION WHEN REQUIRED.
Supplemental Safety and Health
HANDLING CONT'D: ALWAYS ALLOW NELWY MOUNTED WHEELS TO RUN AT OPERATING
SPEED W/GUARD IN PLACE FOR ONE MINUTE BEFORE GRINDING. ALWAYS
TURNOFF COOLANT BEFORE STOPPING WHEEL TO AVOID CREATING AN OUT OF B
ALANCE WHEEL.

Appearance and Odor:SOLID & ODORLESS

Stability Indicator/Materials to Avoid:YES
ACIDS OF ALL TYPES W/PH<4
Hazardous Decomposition Products:DUST, PHENOL, FORMALDEHYDE

Waste Disposal Methods:USE STANDARD LANDFILL METHODS IAW/FEDERAL, STATE
& LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.